Hi! I just got this Veritas P350. I try to identify the vaporizer /generator for this lamp. Some says that it uses AGM parts but i didn't found any generator in the AGM reference library that looked like this. The gas jet is similar to the one on Coleman 200A what i have home. The jets from 222, 220s or the military lamp doesn't fit. To order from OCP and pay 20$ shipping is not on the budget (at least not for now). The rod on P350 is 4,4 inch (111mm) long. Thickness of the generator 0.373 inch (9.5mm) at the bottom, forgot to measure the length. It appears unused but the screen missing inte flame spreader. So i made one from an old tea holder what my wife discharged from duty. They come well in hand and it's a cheap and good stainless steel. The glass is original. The fyller cap is coleman style in 2 parts. The pump almost coleman style. Air hole must be blocked when pumping and you opoen and close ( screw oppen /screw close) like on Coleman stuff i have (except 1 table lamp and because of that i need to gix a Coleman pump). Does anyone recognise rgis generator or this assembly? I didn't found anything similar in the reference library. ( can i say whit "little" bitterness that in the library are many lamps who has just one or two pictures of the lamp and that is technically impossible to use those pictures when you try to identify some vital parts). The P350 should work with kerosene /fotogen so i tried the lamp with that. It appears working great, att least without mantle and the glass. Later maybe i try it with mantle. Enjoy! /Francisc
Congratulations Francisc for getting it running and it's cleaned up nicely. This is a good reference post.
Thanks @ROBBO55! I didn't hade to much cleaning job to do I just wiped the dust of the lamp Cheers, Francisc
