Chalwyn tropics - genuine?

Discussion in 'Open Forum' started by lamptoad, Jun 6, 2023.

  1. lamptoad Germany

    Offline
    Joined:
    Jun 6, 2023
    Messages:
    16
    Location:
    London, UK
    Just got these from ebay. Can anyone offer opinion on authenticity and date?

    s-l1600.jpg s-l16007.jpg s-l16006.jpg s-l16005.jpg s-l16004.jpg s-l16003.jpg s-l16002.jpg
     
    Last edited by a moderator: Jun 7, 2023
  2. JEFF JOHNSON

    JEFF JOHNSON United Kingdom Subscriber

    Offline
    Joined:
    Nov 28, 2010
    Messages:
    16,895
    Location:
    Shetland Islands UK..
    Welcome aboard!:thumbup:
     
  3. Jörg Wekenmann

    Jörg Wekenmann Germany Subscriber

    Offline
    Joined:
    Jul 11, 2021
    Messages:
    257
    Location:
    Germany
    Hello lamptoad,

    both lanterns were manufactured by the Czech company MEVA in the 1990s. The only thing original about these lanterns are the glasses.
    Could you please take another picture of the tank bottom and post it here?

    Greetings
    Jörg
     
  4. lamptoad Germany

    Offline
    Joined:
    Jun 6, 2023
    Messages:
    16
    Location:
    London, UK
    I suspected as much! Will share a pic later.
     
  5. Fireexit1 United Kingdom

    Offline
    Joined:
    Jun 13, 2020
    Messages:
    3,538
    Location:
    Brighton UK
    Well they are "technically" a Chalwyn, but as Jorg says made in Czeckoslovakia. Not such good quality but better than a lot of Chinese ones.
     
  6. lamptoad Germany

    Offline
    Joined:
    Jun 6, 2023
    Messages:
    16
    Location:
    London, UK
    Here is the base
    [​IMG]
     
  7. lamptoad Germany

    Offline
    Joined:
    Jun 6, 2023
    Messages:
    16
    Location:
    London, UK
    This is the burner assembly. It is held together by the flat pipe at the bottom. These are rusted up so I plan to replace them with homemade versions made of 0.5mm brass. If that doesn't work I'll have to bin the lamps.

    [​IMG]
     
  8. spiritburner

    spiritburner Admin

    Offline
    Joined:
    Sep 6, 2010
    Messages:
    1,340
    Location:
    N.E. England
    Better to upload images direct to the forum like in your opening post.
     
  9. lamptoad Germany

    Offline
    Joined:
    Jun 6, 2023
    Messages:
    16
    Location:
    London, UK
    This is the base

    IMG_20230612_162017_HDR.jpg
     
    Last edited by a moderator: Jun 13, 2023
  10. lamptoad Germany

    Offline
    Joined:
    Jun 6, 2023
    Messages:
    16
    Location:
    London, UK
    This is the burner assembly. It is held together by the flat pipe at the bottom. These are rusted up so I plan to replace them with homemade versions made of 0.5mm brass. If that doesn't work I'll have to bin the lamps.

    IMG_20230612_162039_HDR.jpg
     
    Last edited by a moderator: Jun 13, 2023
  11. Jörg Wekenmann

    Jörg Wekenmann Germany Subscriber

    Offline
    Joined:
    Jul 11, 2021
    Messages:
    257
    Location:
    Germany
    Hi Lamptoad,

    as I can see the Meva company produced them longer as I thought.
    The marking on the bottom of your lamp means:
    First quater in 2001

    Kind regards

    Jörg
     
  12. lamptoad Germany

    Offline
    Joined:
    Jun 6, 2023
    Messages:
    16
    Location:
    London, UK
    Thanks Jörg :)
     
  13. lamptoad Germany

    Offline
    Joined:
    Jun 6, 2023
    Messages:
    16
    Location:
    London, UK
    Had to replace the wick feeders (which were both rusted up) with home-made brass fittings, but they seem to work ok now.
    61308ea7-374b-4f5c-9912-cc34483eda59.jpeg
     
  14. Sammi Jane

    Sammi Jane Subscriber

    Offline
    Joined:
    Aug 19, 2022
    Messages:
    500
    Location:
    Aberdeen, Scotland
    I had a wick winder that had rusted up, but a good long soak in paraffin worked wonders.! :-k
    It was in there for a good few weeks, then I used the paraffin in one of my lanterns. :D/
    Hugs Sammi Jane xXx
     

Share This Page