Is there a hidden area I can’t see on this AGM Kooklite lantern pickup that completes a loop for the startup feature? See top of tube where there is a small gap between outer and a inner piece. Lantern runs for 45 minutes and is loosing pressure by then. Took it all apart and soaked in hot vinegar for 20 minutes or longer. Did not poke around yet to see if there is a area inside the sections that completes a circuit, see fourth photo. In second photo, is that shiny area when pushed back in place into the cross hatched piece, soldered or just a tight fit? There are no leaks from fount, not even the c/v. I know many times, I’m the expert asking questions as no one else has gone there or has that particular appliance they are fettling. Duane
Reassembled the lantern this morning, been running over an hour and 45 minutes, loud like it should be, not showing running low on pressure. Will be happy when it makes it to two hours. Appreciate the help. Duane
