This is a HASAG Model 242, manufactured by Hugo Schneider AG of Leipzig, Germany. It is fuelled by kerosene and rated at 200 candlepower. The mica globe is a replacement added by me. This example exhibits the following characteristics: • The heat deflector on top of the ventilator has a flat profile and is secured with two screws. • The ventilator is held to the frame by a bayonet clip. • The vaporizer is not of the straight type, but instead features a Preston loop. • The pump knob is retained by inserting its protrusion into a hole in the pump cover, forming a stopper-style locking design. • On the front of the tank, there is a relatively small HASAG stamping, flanked on both sides by the “H S” company marks. As relatively few HASAG catalogues are known to survive, and as I have not been able to identify a catalogue in which the Model 242 is illustrated, precise dating remains difficult. Accordingly, the following assessment should be regarded as tentative and subject to revision should further documentary evidence come to light. Based on examples of the Model 242 that I have observed to date, it appears that at least two different fuel cap designs may have been used. The fuel cap shown in the upper left of image 10 is thought to represent an earlier version. The fuel cap fitted to this example, shown in the lower right of image 10, appears to correspond to a later type, as it closely resembles the design used on the Model 42 illustrated in a BAT catalogue dating from around 1938, shared by John (@presscall). The BAT name was a brand employed by Hugo Schneider for export models intended for the British market. It should be noted that BAT was originally a trade name registered by Firma Stuebgen; this company was subsequently taken over by Hugo Schneider around 1937. As a result, from that point onward, Hugo Schneider owned not only the HASAG brand but also the BAT brand. Taken together with the features described above, it therefore seems reasonable to suggest that this example may date from the late 1930s. With an overall height of approximately 32 cm, this is a very practical and user-friendly lantern. Best regards, Shinzo
Hello gkpllantern Hasag No. 242 was introduced in 1936. Here is an illustration from catalogue 1463 from 1936. Best regards, Jörg
Lovely lantern, with some interesting features. I commend you for the beautiful detailed photos which are stunning. Congratulations.
From the catalogue pictures I assume that this hood belongs to an earlier version. There are at least two or three versions with a central screw as can be seen here, here, or here. These models also feature a different inner chimney. The style differs from the more “Petromax-like” version at the model shown in this thread and looks more like the one found on the 351L.
Hello Martin, The Hasag Model 242 is based on the Hasag No. 42 lantern. The No. 42 had a central locking screw for the hood. However, the slots were shaped slightly differently. Here is the Hasag 42 from the same 1936 catalogue. And here are the spare parts that were the same for the 42 and the 242. These are the spare parts that differ between the two models. I think Shinzo's lantern matches the catalogue picture perfectly. Kind regards Jörg
@gkpllantern Really nice lantern I'm curious. Do you make your own mica globe or buy them from a store? Tom
@Jörg Wekenmann @Tony Press @David Cully @Martin K. @presscall @Tom Pedersen Thank you all very much for your comments. Jörg, Thank you for sharing the catalogue images of the Hasag 242 and 42. From these, I learned that the 242 was introduced in 1936, and once again I have gained valuable knowledge from your research. I am sincerely grateful. Tom, The mica globe is not my own work; it was sourced from a lamp shop in Japan. Best regards, Shinzo
@JEFF JOHNSON @Titoo @Sammi Jane Thank you very much for your kind words — I’m very glad you enjoyed the post. And yes — the Stargate is located in Japan after all It’s actually a large wooden ring made from tree branches, and if you look through it, you can see Mt. Fuji in the distance. I took that photo at a campsite in Shizuoka. Perhaps it’s not a portal to another galaxy — but it is a gateway to good coffee, quiet mornings, and pressure lanterns! Best regards, Shinzo
So did I, and I've had two books published in that genre, and the third is getting the final typesetting done, if you're interested have a look at my profile.
@Sammi Jane That’s amazing — two published books and a third on the way! I’ll have a look at your profile for sure. If your Space Munky ever needs an old pressure lantern to light up a distant planet, I have just the right one ready to travel through the Stargate! Br, Shinzo
