http://tgmarsh.faculty.noctrl.edu/agmlantearly.htm Any help or advice about the burner set-up in these is most appreciated. Pic 3 shows a typical AGM burner... under the dome at the top is the small threaded pipe that is crimped closed. The pipe has a small needle size hole in it. Can't get this burner to work using coleman generator(s) Fount is coleman, burner is now coleman and works fine. Thanks Ian
Hi Ian, The tube under the dome isn't supposed to be crimped, I have several AGM's set up like that here and it's a straight tube. The fuel comes out of the generator straight through the tube then fills the dome and is forced out the burners at the bottom. The lamp fount is a good look for that lantern.
Thats great, I tried for hours with numerous flame ups... Someone was at it before me. I don't really like changing them out unless it's necessary. Ian
