There was a discussion either here or on CSS about the size/pitch of the screw holding the insert in a Coleman 3-piece fuels cap. Couldn't find...
@presscall John, you need to find an MGB with wire wheels and when no one's looking open the boot and nick the lead hammer that serves as a lug...
I suspect that even the kerosene lanterns for the Navy were for shore use only. They really, really frown on open fires onboard ship, especially...
Based on the pictures you need a 220E or 220F burner. The later ones had various stamped and press fit pieces. I'll see what I can find later today.
Because of the small diameter of the PL-1 generator I think refurbishment would be difficult. However, you have a lifetime supply of new...
If it's the reddish colored coating, denatured alcohol (meths to you) will take it out. If the fount is not leaking there is no need for POR15...
War time produced Webley 380/200 revolvers were clearly stamped on the frame "War Finish" as they didn't want anyone to think that ugly black...
I am envious of those who are able to actually display their collection. Mine has been forced into the rafters of my garage, a couple of layers...
John, you're absolutely right the wire wheel in the example above would be rough on brass unless you have a very deft touch. But as Bruce says...
Thanks all. Identified on CCF as an AGM KFL-3 missing the cast iron base plate and collar for the LP can.
Haven't looked but suspect the generator is just an empty tube with a jet at the end.
Picked this up in a box of parts. Pretty sure the vent is AGM, the globe is Coleman 200a. Anyone recognize the burner or valve? Threaded bottom...
Take a look here at the AGM pages for a match. Yes you are missing the collar between the fount and frame. Once you identify the model post a...
Use a brush or piece of frayed stranded wire to clean the inside of the burner tubes and air tube. Spiders love to hide egg sacs in them and...
If you have access to Rustoleum products Sunrise Red is a good match for the stove fuel tanks and some versions of 200A.
Intresting. I could have used this a few weeks ago. Instead this is how I dealt with a broken needle on a stove....
All of the 220 series used the two-tube and rod FA setup, it didn't stop at the 220F. The 275 was the first Coleman to use a Schrader valve and...
@David Lawlor While I realize your original question is really about how well lanterns work in wind, the wording makes me think of conversations...
Bar Keeper's Friend is a pretty aggressive polish, hence the warning about highly polished surfaces. In the US Mother's Mag and Aluminum Polish...
@leo Are you running kerosene? PWs are normally a CF lantern and instant light as well. The preheat cup leads me to believe you've converted to kero?
Separate names with a comma.
