Hi Henry Great information was older than I thought, will order parts and post picture when fettled. Thanks Andrew
Thanks for the infornation will order a few parts and see if it will go. Thanks again Andrew
Good evening, just bought a 828E from local boot sale, can any body help me with a few things 1 How old is it can not find any markings on the...
Needed a new generator and burner caps but is up and running seems very bright even in the daylight going to be a long wait till dark. [ATTACH]
Thanks every one another Tilley brought back from the dead[ATTACH]
I am going to make sure the the threads in the cage are good before I reassemble .
Thanks that's great can order a tap and die and get the old girl up and running. Thanks again
thanks I will see if i can clean them up and try again. thanks
OK Thanks
hi Can any one help, i have a X246 1961 model and the threads on the tank that hold the frame to the tank are a bit suspect , does any one know...
Think I will earn a few brownie points before I try that one !!
Just been on the Coleman site lots of good information, filler plug seals in the post. Thanks everyone for your help.
Thanks for the information
I have a 427K bought from a local boot sale,It is date stamped D 39. and states on the bottom for paraffin / kerosene. I have ordered a pump seal...
Sounds like etch primer is what I am looking for,thanks for every ones input.
Can some one please advise me if you use a undercoat/primer with plasti kote fast enamel (brass) I have looked on the manufacture Web site and on...
Separate names with a comma.
